Bộ đếm Hanyoung GF7-P62E

- Chức năng: Đếm theo giá trị đặt trước, cài đặt tỷ lệ, lưu trữ khi mất điện

- Kích thước: 72x72mm, 2 mức cài đặt

- Hiển thị: 6 số LED 7 thanh

1,872,000 đ

Hướng dẫn sử dụng

Model	Code				Information
GF4-					Digital counter / Timer (48 X 48 ㎜)
Type	P				Pre-set counter
Type	T				Total counter
Displayable digits		4			4 digits (9999)
Setting stage			0		None (total counter)
Setting stage			1		1st stage setting (Preset counter)
Terminal structure				N	Terminal
Terminal structure				S	8 pin structure (suitable for 8 pin socket)

Model	Code				Information
GF7-					digital counter / Timer (72 X 72 ㎜)
Type	P				Pre-set counter
Type	T				Total counter (6 digits only)
Displayable digits		4			4 digits (9999)
Displayable digits		6			6 digits (999999)
Setting stage			1		1st stage setting
			2		2nd stage setting
			0		Total counter
Pre-scale function				E	Pre-scale function built in (Preset counter)
Pre-scale function				N	No Pre-scale (Total counter)

Thông số kĩ thuật

Model

GF4-P

GF4-T

In Timer
function

Repeat accuracy

±0.01 % ± 0.05 % second Max. (Power supply start)

± 0.005 % ± 0.003 % second Max. (Reset start)

Ratio to set value

Variation due to
voltage change

Variation due to
temperature change

Insulation resistance

100 MΩ Min. (at 500 V d.c)
(between current - carrying terminal and exposed noncurrent - carrying metal parts,
between power supply circuit and control output circuit)

Dielectric strength

2,000 V a.c 50 / 60 Hz for 1 minute
(between current - carrying terminal and exposed noncurrent - carrying metal parts,
between power supply circuit and control output circuit)

Noise immunity

Square wave noise by simulator
AC : ± 2 kV (between power supply terminal board)
± 500 V (between input terminal)

Vibration

Mechanical durability : 10 to 55 Hz : 0.75 mm double amplitude
Malfunction durability : 10 to 55 Hz : 0.5 mm double amplitude

Shock

Mechanical durability : 300 m/s² (approx. 30 G)
Malfunction durability : 100 m/s² (approx. 10 G)

Life expectancy

Mechanical : 10,000,000 operations Min.
Electrical : 100,000 operations Min. (250 V a.c 3 A)

Weight

GF4 - P : 184 gms, GF4 - T : 168 gms (with adaptor), GF4 - P41S : 100 gms

Power supply

100 - 240 V a.c 50 - 60 Hz

Power consumption

GF4 - T : 4.8 V A, GF4 - P : 6.2 V A (240 V a.c 60 Hz)

Reset / Inhibit

Reset by power OFF : Min. power OFF time : 0.5 s
External reset or inhibit : Min. reset input signal width : 0.02 s

Control output

SPDT : 250 V a.c 3 A cosØ = 1(resistive load)
Open collector : 30 V d.c Max. 100 mA Max.

Ambient temperature

Operating : -10 °C to 55 °C

Humidity

35 to 85 % R.H.

Model		GF7-P	GF7-T
Appearance(mm)		72(W) x 72(H) x 127.5(D) mm
Sort		Freeset	Display
Display method		7 Segment LED , LED Height : 10mm
Stage of freeset		1 stage, 2stage	-
Display digit		4 digits, 6digits	6digits
Max. Counting speed		30 / 1K / 3K / 5Kcps
Counting input		contact, Non - contact
Reset		External reset : Min. input signal width 0.02sec(contact, Non-contact input ) Power reset : Min. power opening time 0.5sec
Inhibit input		Voltage input ( d.c input ) [H] level 5 ~ 30 V d.c, [L] level 0 ~ 2 V d.c ( input resistance Approx. 4.7 kΩ)
Memory protection		Semi-permanent
Power voltage		100 ~ 240V a.c ( 50 / 60Hz )
Power consumption		Approx. 5V A ( 220V a.c 60Hz )
Sensor voltage		12V d.c 50mA Max
Control output		Contact output : 1c 250V a.c 3 A / Non - contact output : 30V d.c, 100mA Max
Insulation resistance		Min, M廓 ( At 500V d.c ) part of conduction terminal and exposured non-electrify metal part
Dielectric strength		2000V a.c50 / 60Hz for 1minute ( Between + and - charging terminals )
Vibration	Malfunction	2 - 55Hz, X, Y, Z, Each direction for 10 minutes
	Durability	10 - 55Hz, 0.76mm, X, Y, Z Each direction for 2 hours
Shock	Malfunction	100 m/s² 6 positions, Each 3 times
	Durability	300 m/s² 6 positions, Each 3 times
Life	Mechanical	10 millions operations Min ( Relay type )
	Electrical	0.3 million operation Min. ( Relay type )
Ambient temperature and humidity		0 ~ 50 °C(32 ~ 122 °F)ㆍ35 ~ 80 % R.H. (No icing)